Volume 32/Number 2 2021

RNDE Index and Abstracts

Browse results:

Volume 29, Number 4 (2018)

Unmanned Aerial Vehicle (UAV)-Based Assessment of Concrete Bridge Deck Delamination Using Thermal and Visible Camera Sensors: A Preliminary Analysis.
Rdiger Escobar-Wolf, Thomas Oommen, Colin N. Brooks, Richard J. Dobson, and Theresa M. Ahlborn.
(16 pages) abstract

Eddy Current Testing of Delamination in Carbon Fiber Reinforced Polymer (CFRP): A Finite Element Analysis.
Zhiwei Zeng, Shaoni Jiao, Fei Du, Lei Sun, and Jian Li.
(13 pages) abstract

Characterization of Hydrogen Embrittlement in 2.25cr-1mo-0.25v Steel by Eddy Current Method.
Haiting Zhou, Chi Xu, Qingming Wang, Hongliang Pan, and Jianjun Chen.
(9 pages) abstract

Applicability of the Magnetic Barkhausen Noise Method for Nondestructive Measurement of Residual Stresses in the Carburized and Tempered 19CrNi5H Steels.
H. Hizli and C. Hakan GR.
(16 pages) abstract

A predictive model for characterizing hardness of D2 tool steel by eddy current method: A statistical optimization approach.
Taha-Hossein Hejazi and Saeed Kahrobaee.
(18 pages) abstract

Volume 29, Number 3 (2018)

Detection of Impact Damage in Carbon Fiber Composites Using an Electromagnetic Sensor.
Zhen Li, Arthur D. Haigh, Mohamed Nasr Saleh, Edward D. McCarthy, Constantinos Soutis, Andrew A. P. Gibson, and Robin Sloan.
(20 pages) abstract

Feasibility of a New Moving Collimator for Industrial Backscatter Imaging.
Ahmed Balamesh, Mohammad Salloum, and Samir Abdul-Majid.
(13 pages) abstract

Evaluation of Aluminium Alloys Degradation in Aging Aircraft.
?rest Ostash, Valentyn Uchanin, Oleksandr Semenets, Yuriy Holovatyuk, Leonid Kovalchuk, and Valeriy Derecha.
(11 pages) abstract

Algorithms for the Magnetic Assessment of Proton Exchange Membrane (PEM) Fuel Cells.
James R. Claycomb.
(16 pages) abstract

Volume 29, Number 2 (2018)

Optimization of SAW-type Surface Wave Ultrasonic Sensors for Ultrasonic SHM.
R. Takparaa,b, M. Duquennoya, M. Ouaftouha, C. Courtoisb, F. Jenota, and M. Rguitib.
(17 pages) abstract

Adaptive Discretization for Computerized Tomography.
Snehlata Shakyaa, Anupam Saxenab, Prabhat Munshib, and Mayank Goswamic.
(17 pages) abstract

Optimization of Periodic Permanent Magnet Configuration in Lorentz-Force EMATs.
Rishikesh Benegal , Fatemeh Karimi, Tobin Filleter, and Anthony N. Sinclair.
(14 pages) abstract

Feasibility Study for Improving the Image Characteristics in Digital Tomosynthesis (DTS) Using a Compressed-Sensing (Cs)-Based Pre-Deblurring Scheme.
Kyuseok Kim, Soyoung Park, Guna Kim, Hyosung Cho, Uikyu Je, Chulkyu Park, Hyunwoo Lim, Dongyeon Lee, Hunwoo Lee, Yeonok Park, and Taeho Woo.
(13 pages) abstract

Volume 29, Number 1 (2018)

A New Nomogram Proposal to Determine Concrete Compressive Strength by Combined Nondestructive Testing Methods.
Sinasi Bingola and Ahmet Cavdar.
(17 pages) abstract

Nondestructive Evaluation of Far-Side Corrosion Around a Rivet in a Multilayer Structure.
Jungmin Kima, Minhhuy Lea, Jinyi Leea,b, Sejin Kimb, and Young-Ha Hwangc.
(20 pages) abstract

Eddy Current Detection of Retained Austenite in Ni-Hard4 Cast Iron.
Amine Asadi, Majid Abbasi, and Maryam Shamgholi.
(10 pages) abstract

Ultrasonic Velocity and Attenuation in Epoxy Resin/Granite (Marble) Powder Composite.
Ali A. M. Yassenea, S. Faresb, A. Ashourb, and M. Abd El-Rahmanb.
(13 pages) abstract

To browse other volumes click here.